Nokia 2680 Slide Service Manual page 15

15) Remove the LCD.
17) Separate the LCD from the LCD support.
19) Hold the slide module and insert the SS-93 tool to
release the D-Cover tabs.
15
16) Use the dental pick to release the tabs on
both sides of the LCD support.
18) Lift and remove the numerical keymat and
C-Cover Assy.
20) Use the SS-93 tool to release the UI Flex
connector from the engine side.
Confidential
Copyright @ 2008 NOKIA. All rights reserved.
2680 Slide RM-392, RM-393
Service Manual Level 1&2
ISSUE 1