Mazda 6 Smart Start Manual page 37

Instrument Cluster Type A
(with Multi-Information Display)
OUTSIDE
TEMPERATURE DISPLAY
The outside temperature unit can be
switched between °C and °F using System
Settings in the infotainment system.
IMPORTANT:
When your Mazda
Connect display setting is set on "AUTO",
the instrument cluster and display may
become dimmer when the headlights are
on. If the display and instrument cluster
become too dim or too bright when
the headlights are on, simply rotate the
dimmer knob located on your instrument
cluster to adjust the brightness.
GLOSSARY OF WARNING AND INDICATOR LIGHTS
Lane Departure Warning System
(LDWS) and Lane-keep Assist
System (LAS) System On (WHITE)/
Lane Detected (GREEN)
Adaptive Front-Lighting System
AFS
OFF
(AFS) OFF
TCS
Traction Control System (TCS) OFF
OFF
Traction Control System (TCS)/
Dynamic Stability Control (DSC)
On: TCS/DSC malfunction
Flashing: TCS/DSC operating
Blind Spot Monitoring (BSM) OFF/
Rear Cross Traffic Alert
(RCTA) System
SPORT Mode On
Lights On (Exterior)
High Beam Control On
Headlight High Beams On
Air Bag/Front Seat Belt
Pretensioner System Malfunction
Check Engine
Seat Belt Unbuckled/Malfunction
TPMS NOTE:
35
change and turn the TPMS warning light on. If the warning light comes on, see p. 6.
(pp. 23)
(p. 29)
(pp. 25-26)
(p. 38)
Low ambient temperature and/or high altitude may cause tire pressures to
TCS
OFF
TACHOMETER
Engine Oil Level
LED Headlight
Brake Pedal Operation Demand
Turn Signals/Hazard
Tire Pressure Monitoring System
(TPMS)
(p. 6)
On/Warning Beep: Low tire pressure in one
or more tires. Flashing: TPMS Malfunction
Cruise Main On (WHITE)
Cruise Set On (GREEN)
Mazda Radar Cruise Control
On (AMBER), Set (GREEN)
Anti-lock Brake System
(ABS) Malfunction
Shift Position
Security System
Smart Brake Support (SBS) and
Smart City Brake Support (SCBS)
Flashing Red: SBS and SCBS are operating.
Amber: SBS and/or SCBS malfunction.
SBS and SCBS are turned off.
(pp. 19-20)