Program Play - Technics SL-PG4 Operating Instructions Manual

RANDOM
POWER
REPEAT RECALL
PROGRAM
1
9
Last track number
programmed
8
RQT5701
1 2
CLEAR
≥10
0
Total playing time of program
Program position
Other play modes
3

Program play:

Select up to 20 tracks to play in the order you choose
1
Press [PROGRAM].
The track playing is programmed as the first track if you press
the button during play.
2
Press the numbered buttons to enter
the track number.
For tracks numbered 10 and over, press [≥10] and the two dig-
its.
Press [CLEAR] if you enter a number in error (while stopped).
Repeat this step to program the tracks in the required order.
3
Press [ ].
All the tracks are played in the selected order.
To cancel program mode
Press [PROGRAM].
" " is displayed
You have programmed 20 tracks and cannot program any more.
" " is displayed
Total playing time of the program exceeds 99 minutes and 59 sec-
onds. You can still program and play tracks.
To check the contents of the program
Press [RECALL].
The track numbers and their programmed positions are displayed each
time you press the button.
To program additional tracks
Press the numbered buttons.
To clear tracks from the program
From the last track
A particular track
All tracks
For your reference
•The program remains in the memory after play finishes. Press [
to play the same program again.
•To play the program repeatedly
Press [REPEAT] after starting program play.
•To play the program randomly
Press [RANDOM] after programming the tracks.
Press [CLEAR] while stopped.
Press [RECALL] to display the track, then
press [CLEAR].
Press [ ] while stopped.
Program play is also canceled.
]