Album Skip Play; Track Skip Play; Intro Function (Album Scan); Program Play For Mp3 - Panasonic SC-AK323 Operating Instructions Manual

How discs with MP3 differ from CDs
ALBUM ( or )

Album skip play

During play or stop
On the remote control
Press [ALBUM (
On the main unit
AK520
Push the joystick up/down ([ALBUM
[ALBUM /CHARA]) to select the desired album.
When selecting in the stop mode:
Current album
Press [:/J, CD] to start play.
Play starts from the first track of the selected album.
To play from another track, refer to "Track skip play" below.

Track skip play

During play or stop
On the remote control
Press [ g, REW/3] or [f, 4/FF] to select the desired
track.
On the main unit
Push the joystick left/right ([ g, CURSOR] or [f,
CURSOR]) to select the desired track (
Press [g/REW/3] or [f/FF/4] to select the desired
track.
When selecting in the stop mode:
Current album
Press [:/J, CD] to start play.
10
Play starts from the selected track.
To play from another album, refer to "Album skip play" above.
RQT7330
AK520
AK523
or )] to select the desired album
AK523
/CHARA)] or
Number of tracks
in current album
AK520 AK523
OR
Current track
Note
During 1-ALBUM mode, track skipping can only be done within the
current album.

INTRO function (Album scan)

You can find an album by listening to the first track of all albums in the
current disc for 10 seconds each.
Remote control only
Preparation: Press [:/J, CD] and then [L, CLEAR].
1
Press [INTRO].
INTRO function starts.
(INTRO function is cancelled after playing the first track in the
last album on the current disc.)
2
While your desired album is playing, press [ : : : : : / J, CD].
Play continues from the first track of the album.
To stop during the process, press [INTRO] or [L, CLEAR].

Program play for MP3

You can program up to 24 tracks.
Remote control only
Preparation:
1. Press [DISC] and (within 10 seconds) [1]–[5] to select the disc.
2. Press [L, CLEAR].
1
Press [PROGRAM].
"PGM" appears.
2
Press [ALBUM (
To select an album directly, press the numbered buttons
after pressing [ALBUM (
To select album 10 or over, press [>10] once then the two digits.
To select album 100 or over, press [>10] twice then the three digits.
3
g
Press [ , REW/
To select a track directly, press the numbered buttons after
pressing [ g, REW/3] or [f, 4/FF].
To select track 10 or over, press [>10] once then the two digits.
.
To select track 100 or over, press [>10] twice then the three digits.
4
Press [ENTER].
Repeat steps 2~4 to program other tracks.
5
Press [:/J, CD] to start play.
To exit program mode
Press [PROGRAM] in the stop mode. (You can replay your program
by pressing [PROGRAM] then [:/J, CD].)
You can do the following while "P" is displayed
AK520 AK523
•
To check program contents
Press [g, REW/3] or [f, 4/FF].
Every time you press the button:
AK520 AK523
AK320 AK323 : Program order is displayed, then album number
•
To add to the program
).
Do steps 2~4.
•
To clear the last track
Press [DEL].
•
To clear all tracks
Press [L, CLEAR].
While "CLEAR ALL" is blinking, press the button again to clear all
tracks.
Note
•
You can use repeat mode (A page 8) with program play.
•
You cannot program more than one CD for MP3.
•
You cannot program CD-DA together with MP3 tracks.
•
The program memory is cleared when you change a disc or open
the CD tray.
or )] to select the album.
or )].
, 4/FF] to select the track.
3 f
] or [
AK320 AK323
: Album number, track number and program order
are displayed.
and track number.