IBM x3200 4362 User Manual page 70

1. From the list of adapters, select the controller (channel) for the drives that you
2. Select RAID Properties.
3. Select the type of array that you want to create.
4. Use the arrow keys to highlight the first drive in the pair; then, press the Minus
5. Continue to select the next drive using the Minus (-) or Plus (+) key until you
6. Press C to create the disk array.
7. Select Apply changes and exit menu to create the array.
56
System x3200 Types 4362 and 4363: User's Guide
want to mirror.
(-) or Plus (+) key to change the mirror value to Primary.
have all the drives for your array.