Table of Contents
Advertisement
Using a handset as a room monitor
If you deactivate then reactivate the hand-
set, the room monitor remains activated.
Warning!
u
Always check the operation of the
room monitor before use. For exam-
ple, test its sensitivity. Check the
connection if you are diverting the
room monitor to an external
number.
u
When the function is switched on, the
handset's operating time is considera-
bly reduced. If necessary, place the
handset in the base/charger. This
ensures that the battery does not run
down.
u
Ideally the handset should be posi-
tioned 1 to 2 metres away from the
baby. The microphone must be
directed towards the baby.
u
The connection to which the room
monitor is diverted must not be
blocked by an activated answering
machine.
58
Activating the room monitor and
entering the destination number
É
¢
¢
v
Room Monitor
¤
You can enter data in the following fields:
Activation:
Select On to activate.
Alarm to:
Select Internal or External.
External number: Select the number
from the directory (press display key
or enter it manually.
Internal number: Select display key
¢
§Change§
. Select handset or Call All to
call all registered handsets
In idle status, the destination number or
the internal destination number is dis-
played.
Sensitivity:
Select noise level sensitivity (Low or
High).
¤
§Save§
Press
to save the settings.
When the room monitor function is acti-
vated, the idle display appears as shown
below:
i
V
07:15
Á
INT 1
22 Oct
Room Monitor
0891234567
OFF
Options
ö
)
¢
§OK§
.
Advertisement
Table of Contents
