16
www.electrolux.com
5.3 Options Setting
If you want your laundry to be spun or
1.
use temperature different from the one
proposed by the washing machine,
pess the Spin "
temperature "
repeatedly to change the spin speed
and temperature.
Press the option touchpads, if you
want your laundry to be washed with
special functions.
-
Different functions can be combined
which is dependent on the program
selected.
-
If an option is not compatible with
the wash program selected, symbol
"
with buzzer sound.
2.
If you want to adjust washing time,
press the "Time Manager (
touchpad repeatedly to increase or
decrease washing time. See Time
Manager guide on page 12.
If you want to define the end of the
washing program, press the "Delay
End (
choose your washing machine
working time.
5.4 Starting A Cycle (
To start a program, press the
Start/Pause touchpad. The
corresponding pilot light will stop
flashing and a default program duration
will be displayed on the screen.
-
If you press any touchpad while a
program is operating, symbol "
will flash on display along with buzzer
sound. (except Start/Pause touchpad
and On/Off button)
-
If you turn the program selector knob
to another program when the
machine is working, symbol "
will flash on display along with buzzer
sound to indicate a wrong selection.
The machine will not perform the
new selected program.
" and the
" touchpads
NOTE
" will flash on display along
)" touchpad repeatedly to
NOTE
After approx. 15 minutes from the
start of a program:
-
The appliance will automatically
adjust the selected program duration
according to the type and size of the
load.
-
The display will show adjusted
program duration.
5.5 Interruption Of A Program
-
To pause, press Start/ Pause. The
indicator will start flashing.
-
Press the Start/Pause again. The
program will continue.
5.6 Changing A Program
Changing a running program is possible
only by switching off the appliance.
-
Press the "On/Off" button to cancel
the program and to turn off the
)"
appliance.
-
Press the "On/Off" button again to
start the appliance.
Now you can set a new wash program
and change any available options. Press
Start/Pause to start the new program.
The appliance will not drain the
water (except programs;
Vapour Refresh, Spin, Rinse + Spin,
Tub Clean).
)
5.7 Changing The Options
It may be possible to change some of the
options after a wash program has started.
Press the touchpad Start/Pause. The
1.
indicator will start flashing.
If available change the options that
2.
you wish.
Press Start/Pause again. The program
3.
"
will continue.
5.8 Opening The Door
While a program or the Delay End is
operating, the appliance door is locked
"
and the display shows the indicator "
First, set the machine to PAUSE by
pressing the "Start/Pause" touchpad. Wait
until the door lock indicator "
then the door can be opened.
".
" goes off,