Table of Contents
Advertisement
Assembly screw (4)
(silver)
•
M5 × 20 (mm)
Pole (1)
•
TBL5ZA3065
Assembling the pedestal
Use the assembly screws
to the base
securely.
•
Attach the cover
with assembly screw
•
Make sure that the screws are securely tightened.
•
Forcing the assembly screws the wrong way will
strip the threads.
A
Pole
Base
Front
Securing the TV
Insert the bracket into the TV, and then fasten
securely with the assembly screws
•
Tighten the four assembly screws loosely at first,
then tighten them firmly to fix securely.
•
Carry out the work on a horizontal and level surface.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall hanging bracket or repacking the
TV.
Remove the assembly screws
Pull out the pedestal from the TV.
Remove the assembly screw
Pull out the cover.
Remove the assembly screws
Adjust the panel to your desired angle
(View from above)
•
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full
rotation range.
•
Do not place any objects or hands within the full rotation range.
Assembly screw (4)
(black)
•
M5 × 25 (mm)
Base (1)
•
TBL5ZX0049
to fasten the pole
.
B
from the TV.
from the cover.
from the pole.
10°
10°
Assembly screw (1)
(black)
•
M4 × 8 (mm)
Cover (1)
•
TBL5ZB3095
C
Bottom view
Rear side
Hole for
pedestal installation
Pole
Base
7
Advertisement
Table of Contents
