Table of Contents
Advertisement
■
[Wireless]
3
Select the connection type
Connection Type
Please select network connection type.
Search for access point
WPS(Push button)
■
[Search for access point]
Access points found automatically are listed.
Available Access Points
No.
SSID
Wireless type Encrypt
1
Access Point A
11n(2.4GHz)
2
Access Point B
11n(5GHz)
3
Access Point C
11n(5GHz)
Encryption Key Setting
Connection will be made with the following settings:-
SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
Access Point Settings
Encryption key
A B C D E F G H
I
J K L M N
U V W X Y Z
0 1 2 3 4 5 6
a b c d e
f
g h
i
j
k
l m n
u v w x
y
z
(
)
+
-
.
*
_
Access Point Settings
Encryption key is set to:-
XXXXXXXX
Select 'Yes' to confirm.
Select 'No' to change.
Yes
■
[WPS(Push button)]
WPS(Push button)
1) Please press the 'WPS' button on the access
1) Please press the 'WPS' button on the access
point until its light flashes.
point until its light flashes.
2) When the light is flashing select 'Connect' on
2) When the light is flashing select 'Connect' on
TV.
TV.
If you are unsure, please check the instruction
If you are unsure, please check the instruction
manual of the access point.
manual of the access point.
Connect
Perform the connection test after the access point setting is finished
Connection Test
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Complete the network connection
4
(Press twice)
select
confirm
1
Select your desired access point
Reception
select
access
2
Access the encryption key input mode
•
If the selected access point is not encrypted, the confirmation
screen will be displayed. It is recommended to select the
encrypted access point.
3
Enter the encryption key of the access point
(Set characters one by one)
O P Q R S T
7 8 9
!
:
#
select
o p q
r
s
t
set
•
You can set characters by using numeric buttons.
4
Select [Yes]
select
set
•
To re-enter the encryption key, select [No].
•
If the connection has failed, check the encryption key, settings
No
and positions of your access point. And then, follow the on
screen instructions.
Press the WPS button on the access point until the light flashes.
And then, press the OK button to connect the Wireless LAN
Adaptor and the access point.
•
Ensure that your access point supports WPS for this method.
•
WPS: Wi-Fi Protected Setup™
: succeeded
The test is successful and the TV is connected to the
network.
: failed
Check the settings and connections, and then select
[Retry].
•
To set manually, select [Manual] and set each item.
For details
•
If your access point supports WPS (Push
button), then select this option. If not,
select [Search for access point].
•
To search access points again
•
For the information of the
highlighted access point
R
•
To set manually (p. 63)
RETURN
Store
(p. 63)
Y
INFO
15
Advertisement
Table of Contents
