Canon LBP352 User Manual page 404

Gutter
Adjust the margin width of the edge specified in <Binding Location> by shifting the print position of the print data. If
you select "0.0", the margin will not be changed.
-50.0 to 0.0 to +50.0 (mm)
(
Margin values
Specify the direction and width for shifting the print position of the print data. The edge where the margin is
changed varies depending on whether a "+" or "-" value is set. You can adjust the margin width in 0.5 mm
increments.
Portrait-oriented document
Setting Value
"+" value
"-" value
Landscape-oriented document
Setting Value
"+" value
Setting Menu List
) <Layout> <Gutter>
Long edge binding Short edge binding
Left end of paper
(for left binding)
Right end of paper
(for right binding)
Long edge binding Short edge binding
Left end of paper
(for top binding)
Use /
Upper end of paper
(for top binding)
Lower end of paper
(for bottom binding)
Upper end of paper
(for right binding)
397
to enter the offset value