Rear Monitor, Bgc; Aspect Ratio - Panasonic CQ-VD7500U Operating Instructions Manual

MENU: Input/output Settings
E
N
G
L
I
S
H
Menu
54
VTR SKIP
(VTR Skip)
If a VTR is not used, the VTR mode is
skipped when changing the mode.
VTR 1 SKIP
(VTR1 skip)
VTR 2 SKIP
(VTR2 skip)
VIDEO-CONT
connected to VTR1-IN
(Video control setting)
This "Video Control Setting" is
connected to VTR2-IN
required when you connect a
Notes:
Panasonic car navigation system with
¡Select a terminal connected to
a built-in DVD player (available in
the DVD output terminal of a
future).
Panasonic car navigation system
with a built-in DVD player (avail-
able in future) through an RCA
cord.
¡When you connect a Panasonic
car navigation system with a
built-in DVD player, connect a
video control lead as well.
(a
REAR MONITOR
same as front monitor
(Rear Monitor Set Up)
You can have different picture and
sound on the front and rear monitors
at the same time (a page 74).
Preparation: Connect another
optional rear monitor. (e.g. CY-
VMX6800U) (a Installation
Instruction)
BGC
(BackGround Camera)
( Always display background camera
on the display)
OFF
This function allows the background cam-
era view to be displayed at the all times.
Note: You can enter the BGC menu
also by pressing and holding [MENU]
for 2 sec. or more.
70
CQ-VD7700U/VD7500U
(continued)
Setting Value Operations
OFF : do not skip
Panel
ON : skip VTR1/2 OFF
or
default: OFF
Remote
[}] or [{] a []] or
VTR1
Panel
:
VTR1 or
VTR2
:
Remote
default: VTR1
[]] or [[]a [ENTER]
Installation Instructions)
AUTO
Panel
:
AUTO TV
TV
: TV
SD VTR1
DVD
: DVD
SD
: SD
Remote
[]] or [[]a [ENTER]
VTR1
: VTR1
VTR2
: VTR2
default: AUTO
ON
: Background camera Panel
view is always on
OFF
or
the display.
: Each mode image
Remote
is on the display.
[]] or [[] a [ENTER]
default: OFF

Aspect Ratio

: Previous menu Default: NORMAL
: Exit Mode: 4 types
ON
NAVIGATION
PWR
[[]a [ENTER]
STOP
TOP MENU
DVD / SD MENU RANDOM
ST/ MONO
AUDIO
CH1
1
4
VTR2
7
ASPECT
A A
P-MODE
[A] (ASPECT)
V / DVD / SD RECEIVER
ASP ASP
P·MODE
ASPECT
[ASP] (ASPECT)
DVD
VTR2
Notes:
¡This adjustment is applicable to TV, VTR1, VTR2, DVD, video CD and SD-Card mode.
¡The aspect ratio is adjustable between Full and Normal when the wallpaper is on the screen.
¡When the rear view camera is in operation with the transmission gear shift in the reverse position, the image is shown on
the "FULL" screen only.
¡In some cases, the picture looks different from the original one due to your selection of aspect.
Cautions:
ON
¡This is to remind you that compression or extension of the screen using the aspect ratio (screen mode) changing
function of this product for commercial purposes of profit making or viewing/listening by the public could infringe on
the rights of the author protected by copyright law.
¡If you expand a normal picture (4 to 3) by using "JUST", "ZOOM" or "FULL" aspect to the full size of the screen, you
might not see the periphery of the picture, or you might see a distorted picture. Therefore, use "NORMAL" mode to
see the original picture as the author intended it.
Press [ASP] (ASPECT) on the display unit or press [A] (ASPECT) on the remote
control to change the aspect ratio as follows.
NAVI MODE MENU
PAUSE PLAY CHAPTER
OSD
RETURN
RET
REPEAT SCROLL
RAND REP PAGE
SUBTITLE TRACK
ANGLE SUB GRP
TITLE / CHAPTER
CH2
2 3 DISP
SCAN
5 6
VOL VOL
8 9
0 SPACE MUTE
CAR AV
TRACK/
CHANNEL
ENTER
D
SD CARD
E
N
G
L
I
S
H
55
NORMAL
¡The conventional display image has a 4 to 3
ratio of horizontal to vertical.
¡In this case, a blank area remains on the
right and left sides of the display.
FULL
¡The screen is extended horizontally as a
whole to the aspect ratio of 16 to 9.
¡The extension ratio is the same at any point
on the screen.
ZOOM
¡The screen is fully extended at the normal
aspect ratio of 4 to 3.
¡The top and bottom of the screen are slight-
ly cut off.
JUST
¡The screen is extended horizontally to the
aspect ratio of 16 to 9.
¡The extension ratio increases toward the
right and left ends of the screen.
71
CQ-VD7700U/VD7500U