Side Cutter; Button Sewing Foot - Singer S900 Instruction Manual

SIDE CUTTER

This foot is used to trim excess material while sewing.
thumb screw, securing the foot.
the stitch width. Never use a straight stitch.
fabric.
the foot is not cutting, it is usually because the material is

BUTTON SEWING FOOT

machine. The foot securely holds the button in place, while
still providing a clear view of the stitching area.
2. Position the button under the presser foot and lower the
foot, holding the button in place.
the stitch width so that the left swing of the stitch drops into
the left hole in the button, and the right swing of the stitch
drops into the right hole of the button.
4. With the needle threaded and the button positioned on the
right side of your fabric under the foot, stitch 5-8 ZigZag
so that the needle drops into the left hole of the button.
80