Xm Satellite Radio; Channel Adjustment; Preset Channel Selection - Panasonic CQ-C1301U Operating Instructions Manual

XM Satellite Radio

Preparation:
You can connect the optional XM receiver (XMD1000) with
optional Digital Adapter (XMDPAN100). For details, refer to the
operating instructions for the XM receiver.
Toll free number
XM Tuner P/N: XMD1000
Extension cord P/N: XMDPAN100
[BAND]
selects a band in the XM Satellite
Radio source.
( Category)
toggles on/off the category mode.
(Hold it down for more than 2 sec-
onds.)
[SRC] (Source)
selects a source.
It is required to sign up to become an XM Satellite Radio sub-
scriber. After checking your XM Satellite Radio ID, sign up on
the XM's website or by calling them.
1
Check of XM Satellite Radio ID.
Write down the ID indicated on the lower right of your XM
receiver (XMD1000).
XMD 1000
L/C 1144XXXXXX
1
Press [SRC] to select the XM Satellite
Radio source.
2
Press [BAND] to select a band.
Call 1-800-XM-RADIO(96-72346)
Call 1-800-942-TERK(8375)
MUTE
[1] to [6]
selects a preset channel in the XM Satellite
Radio source,
and presets the current channel. (Hold it
down for more than 2 seconds.)
XM RADIO ID
XM RADIO ID : XXXXXXXX
About XM
The direct satellite-to-receiver broadcasting technology is used to provide
listeners with crystal clear sound smoothly from coast to coast. XM is over
130 channels of sheer variety: digital-quality music, news, sports, comedy,
traffic & weather, talk, children's programs, and more.
The XM name and related logos are trademarks of XM Satellite
Radio Inc.
CQ-C1401U
SQ
[ ] [ ]
select a channel.
[ ] [ ]
select a category in the category mode.
Check the ID shown by tuning your XM Radio to chan-
nel 0. (Refer to "Channel adjustment")
2
Activate the XM Satellite Radio.
Select either of the below to sign up.
Web site: http://www.xmradio.com/activation
Phone number: 1-800-852-9696
3
Select a channel.

Channel adjustment

[ ]: Lower
[ ]: Higher
Channel selection is not available during the recep-
Note:
tion of channel 1 with category ON. To receive other chan-
nels, set the category to OFF or switch to another category.

Preset channel selection

Press the corresponding preset button from [1] to [6] to
tune in a preset channel.
CQ-C1401U
[DISP] (Display)
switches the information on
the display.
( RADIO ID display)