Table of Contents
Advertisement
Red Hat
Enterprise Linux OS 4.8
®
To install the RAID controller driver when installing Red Hat
1.
Boot the system from the Red Hat
2.
At the boot:, type linux dd.
3.
Press <Enter>.
- To install or upgrade in graphical mode, press the <ENTER> key.
- To install or upgrade in text mode, type: linux text <ENTER>.
- Use the function keys listed below for more information.
[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]
boot: linux dd
Select Yes using the <Tab> key when asked if you have the driver disk, then
4.
press <Enter>.
Do you have a driver disk?
Yes
5.
Press <Enter> to continue.
Insert your driver disk into /dev/sda
and press "OK" to continue.
Select No and press <Enter> to continue.
6.
Do you wish to load any more
driver disks?
6-8
®
Main Menu
No
Insert Driver Disk
OK
Cancel
More Driver Disks?
Yes
No
Enterprise OS:
®
OS installation CD.
Chapter 6: Driver installation
Advertisement
Table of Contents
