Energy Star Compliance; Symbols Used In The Manual; System Requirements; For Pcs - Epson Stylus Scan 2000 User Manual

When choosing a place for the Stylus Scan
Place the EPSON Stylus Scan on a flat, stable surface that extends beyond the
Stylus Scan base in all directions. The Stylus Scan will not operate properly if it
is tilted or at an angle.
Avoid places subject to rapid changes in temperature and humidity. Also, keep the
Stylus Scan away from direct sunlight, strong light, and heat sources.
Avoid places subject to shocks and vibrations.
Leave enough room around the Stylus Scan to allow for sufficient ventilation.
Place the Stylus Scan near a wall outlet where the plug can be easily unplugged.
E S
NERGY TAR Compliance
computers, monitors, printers, fax machines, and copiers in an effort to reduce air
pollution caused by power generation.
w

Symbols Used in the Manual

Warnings
c
must be followed carefully to avoid bodily injury.
Cautions
must be observed to avoid damage to your equipment.
Note:
contain important information and useful tips on the operation of your Stylus Scan.

System Requirements

For PCs

To use your EPSON Stylus Scan, you need Microsoft
®
Windows 98; a CD-ROM drive and a shielded, twisted-pair parallel cable. If you want
to connect your device to a USB port, you need a Windows 98 pre-installed PC equipped
with a USB port; and a shielded USB cable.
6
E S
As an NERGY
E
product meets the
ciency.
E
The International
a voluntary partnership with the computer and office equipment
industry to promote the introduction of energy-efficient personal
TAR Partner, EPSON has determined that this
S
NERGY TAR guidelines for energy effi-
S
NERGY TAR Office Equipment Program is
®
Windows

ENERGY STAR Compliance

®
95, or