Update the firmware
1.
Double click the Gprobe 4 icon
appears
window
as shown in Fig.5
2.
Press the options then choose configure Pin as shown in Fig.5
3.
From the menu that appears, choose the number 17 in "output
pin" and the number 12 in " input pin" as shown in Fig.6
4.
Press the options then choose connection setup as shown in Fig.7
5. From the menu that appears , choose the DDC2Bi3 in "protocol"
and the LPT (0x378) in "port" as shown in Fig.8
ISP CABLE FOR CPU
on the desktop ,then
Fig.5
6. click the "commands" and select the "Batch", as shown in Fig.9, Fig.10
Fig.6
7.
Fig.7
Click the button as shown in Fig.10 to browse the Iicisp.txt file in
the folder that you created.
Note:
you should pay attention to the described path in the
Iicisp.txt file. It must be the same as the file's path that
you
created.
35
190X6&170X6 LCD
Go to cover page
Fig.8
Fig.9
Fig.10