Table of Contents
Advertisement
Submenu items
•
Off: Disables Time Lapse REC.
•
On (
):
- Interval ("Sec"): Image of the subject is captured at a set
interval. Images are automatically shot a frame at a time at
the specified interval and stored in the storage media.
0.5135 (seconds).
Example of Time Lapse Recording
Total time for recording
Recording interval
The Time Lapse Recording function records image frames at
a predefined interval over the total recording time to produce a
time-lapse video.
Time Lapse Recording is useful for filming in the following situations:
• Blooming flowers
• A bird building a nest
• Clouds rolling by in the sky
00:00:20/00:20:00
100 _ 0013
Downloaded From VideoCamera-Manual.com Manuals
Timeline
Time for recording on the
storage media (a video clip of
Time Lapse REC)
00:00:25/00:20:00
00:00:30/00:20:00
100 _ 0013
100 _ 0013
• Time lapse recording mode is released once recording
has been finished. To start another Time Lapse Recording,
repeat steps 1 through 5.
• 50 captured images compose a video of 1 second length.
Since the minimum length of a video your camcorder can
save is one second, the interval you set defines how long
the time lapse recording should be. For example, if you set
the interval to " Sec," total recording time should be set
to at least 4 minute 10 seconds to record a minimum video
length of 1 seconds (50 images).
• Once the time lapse recording finishes recording for its
total recording time, it switches to the standby mode.
• Press the Recording start/stop button if you want to stop
the time lapse recording.
• Audio is not recorded during time lapse recording.
• If a video recording fills up 1.8GB of storage memory, a
new recording file is automatically started at that point.
• If the battery charge is exhausted during the time lapse
recording, the camcorder saves the recording up to that
point and switches to standby mode. After some time, it
displays a warning message, then turns off automatically.
• If memory runs out during a Time Lapse REC, the
camcorder switches to standby mode after saving what
was recorded so far.
• During Time Lapse REC, the zoom and focus functions are
fixed so that you cannot change the settings. Even if the
subject is moved, you cannot change the focus.
• When a time lapse recording starts, the "Time Lapse
Recording" message blinks on the screen and it appears
that the screen has stopped. This is a normal operation;
do not remove the power source or memory card from the
camcorder.
• We recommend using the AC power adaptor for a time
lapse recording.
• Pause function is not available during time lapse recording.
Advanced recording
6
6
Advertisement
Chapters
Table of Contents
