Table of Contents
Advertisement
Hands-free phoning
Setting the private mode
During a conversation, you can switch to private mode (talk
directly on your mobile phone).
1 Touch
or
to turn private mode on or
off.
Adjusting the other party's listening
volume
This product can be adjusted to the other party's listening
volume.
p Settings can be stored for each device.
1 Touch
to switch between the three vol-
ume levels.
Using the voice recognition
function
You can use the voice recognition function of iPhone or
smartphone.
p When an iPhone running iOS 6.1 or higher is used, Siri Eyes
Free Mode is available with this product.
p For using this function with a smartphone, the device must
be compatible with Android Auto. For using the voice
recognition function with a smartphone, launch Android
Auto beforehand.
Refer to Using Android Auto on page 47
1 Display the phone menu screen.
Refer to Displaying the phone menu screen on page 31
2 Touch
.
The voice recognition function launches and the voice control
screen appears.
p You can also launch the voice recognition function by press-
ing and holding the
button.
Notes for hands-free phoning
General notes
Connection to all mobile phones featuring Bluetooth wire-
less technology is not guaranteed.
The line-of-sight distance between this product and your
mobile phone must be 10 metres or less when sending and
receiving voice and data via Bluetooth technology.
32
However, the actual transmission distance may be shorter
than the estimated distance, depending on the usage
environment.
With some mobile phones, the ring sound may not be output
from the speakers.
If private mode is selected on the mobile phone, hands-free
phoning may be disabled.
Registration and connection
Mobile phone operations vary depending on the type of
mobile phone. Refer to the instruction manual that came
with your mobile phone for detailed instructions.
When phone book transfer does not work, disconnect your
phone and then perform pairing again from your phone to
this product.
Making and receiving calls
You may hear a noise in the following situations:
— When you answer the phone using the button on the
phone.
— When the person on the other end of the line hangs up the
phone.
If the person on the other end of the line cannot hear the
conversation due to an echo, decrease the volume level for
hands-free phoning.
With some mobile phones, even after you press the accept
button on the mobile phone when a call comes in, hands-
free phoning may not be performed.
The registered name will appear if the phone number is
already registered in the phone book. When the same phone
number is registered under different names, only the phone
number will be displayed.
The received call and the dialled number histories
You cannot make a call to the entry of an unknown user (no
phone number) in the received call history.
If calls are made by operating your mobile phone, no history
data will be recorded in this product.
Phone book transfers
If there are more than 800 phone book entries on your mobile
phone, not all entries may download completely.
Depending on the phone, this product may not display the
phone book correctly.
If the phone book in the phone contains image data, the
phone book may not be transferred correctly.
Depending on the mobile phone, phone book transfer may
not be available.
Setup for iPod
/ iPhone or
smartphone
When using an iPod / iPhone or a smartphone with this product,
configure the settings of this product according to the device to
be connected.
This section describes the settings required for each device.
The basic flow of iPod / iPhone
or smartphone setup
1 Select the method for connecting your device.
Refer to Setting the device connection method on page
32
2 Connect your device to this product.
Refer to the Installation Manual.
3 If necessary, connect your device to this product via
Bluetooth connection.
Refer to Bluetooth
connection on page 29
®
Setting the device connection
method
To use the iPhone or smartphone on this product, select the
method for connecting your device.
Settings are required according to the connected device.
1 Display the "System" setting screen.
2 Touch [Input/Output Settings].
3 Touch [Smartphone Setup].
4 Configure the following settings.
Device: Select the device to be connected.
Connection : Select the connection method.
Refer to Information on the connections and functions for
each device on page 34
p The setting will change after the following processes are
automatically executed.
— The source is turned off.
Advertisement
Table of Contents
