Page 5
Spindle Weight Level of sound pressure according to 86/188/EEC & 98/37/EC, measured according to EN 50144: D28414 D28432C Voltage Power input 2,200 2,600 D28410 D28411 D28414 D28432C No-load speed 6,500 6,500 (sound pressure) dB(A)* 90.5 90.0 90.0 90.0 Wheel diameter...
Page 6
E N G L I S H Safety instructions 9 Secure workpiece When using power tools, always observe the Use clamps or a vice to hold the workpiece. It is safety regulations applicable in your country safer and it frees both hands to operate the tool. to reduce the risk of fi...
Page 7
E N G L I S H 16 Avoid unintentional starting in Figure A. Contravention may lead to loss of Do not carry the tool with a fi nger on the switch. control and unexpected injuries. Be sure that the tool is switched off before •...
Page 8
E N G L I S H • Disconnect the plug from the supply. • Cut off the plug and dispose of it safely; a plug Wear ear protection with bared copper conductors is dangerous if engaged in a live socket outlet. Package contents •...
E N G L I S H • If required, increase the clamping force by Always ensure that the cable clamp is tightening the screw (9). correctly and securely fi tted to the sheath • Tighten the clamping lock. of the cable. •...
E N G L I S H • Pull the spring-loaded tab (18) to unlock the rotary mechanism (fi g. E1). Hold the tab in the Do not switch the tool on or off when pulled-out position. under load. • Rotate the handle (19) into the desired position (fi...
Page 11
E N G L I S H GUARANTEE THREE YEAR LIMITED WARRANTY INFORMATION HOTLINE WALT will repair, without charge, any defects When you need further information on a D WALT due to faulty materials or workmanship for three product please phone: years from the date of purchase.
Page 12
Australia Black & Decker (Australia) Pty. Ltd. Tel: 03 8720 5100 20 Fletcher Road Fax: 03 9727 5940 Mooroolbark, Victoria 3138 New Zealand Black & Decker Tel: 02 259 1111 81 Hugo Johnston Drive Fax: 09 579 8200 Penrose, Auckland, New Zealand 653602-00 5/07...