Panasonic Palmcorder MultiCam PV-GS9 Operating Instructions Manual page 54

Digital video camcorder
Hide thumbs Also See for Palmcorder MultiCam PV-GS9:
Table of Contents

Advertisement

• The DV STUDIO 3.1E-SE cannot be operated on
Windows 2000.
• When 2 or more USB devices are connected to a
personal computer, or when devices are connected
through USB hubs or by using extension cables,
proper operation is not guaranteed.
• When connected to the keyboard USB Jack, normal
function may not be possible.
• This instruction manual describes only the
procedures for installation, connection and startup.
Please read the PDF-based instructions for how to
use the DV STUDIO 3.1E-SE.
• To view the installed operating instructions, Adobe
Acrobat Reader 5.0 or higher is required. Please
install Adobe Acrobat Reader from the CD-ROM
(Optional Software).
• Before using for the fi rst time, select [Readme] from
[Start] >> [All programs (Programs)] >> [Panasonic]
>> [DV Studio3], and read any supplementary details
or updates.
Installing DV STUDIO 3.1E-SE
(Optional Software)
1 Turn on the personal computer and start up
Windows.
2 Insert the CD-ROM into the personal
computer's CD-ROM drive.
• Quit all applications.
• The [Setup Menu] Screen appears.
3 Click [DV STUDIO].
4 Click [Next].
• After reading the displayed contents, please carry
out the installation according to instructions.
54
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
With a PC
5 After the completion of setup, click on [Finish].
• Installation will be completed.
• Sample data is installed concurrently with the DV
STUDIO 3.1E-SE software.
To Use DV STUDIO 3.1E-SE
• When using the USB Connection Kit, use of the AC
Adaptor is recommended for the power supply of the
Camcorder.
1 Set the Camcorder to Tape Recording Mode
or Tape Playback Mode.
• To capture images from a tape, set the Camcorder
to Tape Playback Mode and insert a tape.
• To capture images viewed through the camera
lens, set the Camcorder to Tape Recording Mode.
2 Set [CAMERA] or [PLAYBACK] >> [USB
FUNCTION] >> [DV STUDIO].
13
14 15
3 Connect the Camcorder to your personal
computer with USB Cable.
(PV-GS12/
(PV-GS9)
PV-GS14/
PV-GS15)
19
16 17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents