Panasonic PV-GS19 Operating Instructions Manual page 45

For Macintosh
OS:
Mac OS X v 10.1 – X v 10.3
CPU:
iMac, iBook or Power Book G4, Power Mac G4 or
Power Mac G5
RAM:
64 MB or more
• The USB equipment operates with the driver
installed as standard in OS.
Installing the USB Driver (For Windows
98SE Only) For Using the Built-in SD
Driver Feature
PV-GS35 Only
Please install USB Driver first before connecting the
Camcorder to your personal computer with the USB
Cable only if you have Windows 98SE OS.
• If your computer has Windows Me/2000/XP, the
USB Driver is not required to be installed.
1
Turn on the personal computer and start up
Windows.
2
Insert the CD-ROM into the personal
computer's CD-ROM drive.
• Quit all applications.
• The [Setup Menu] Screen appears.
[PV-GS35: Supplied]
3
Click the [USB Driver].
• The set up program starts running.
4
Click [Restart] if the [InstallShield] dialog
appears.
• Do not remove the CD-ROM.
5
Finish installation by following the
on-screen instructions.
• Click [Next] and proceed with installation.
• After completing the installation, Click [Finish].
6
After the USB Driver is installed, please
restart your computer.
• Reboot the computer to finish installing USB
driver.
• Installation continues after the computer reboots
if you selected additional software.
With a PC
• A message indicating a conflict between versions
may be displayed during the installation. This will not
cause a problem. Simply click [Yes] to proceed with
the installation.
For PV-GS19/PV-GS31
• If you have direct dial-up connection capability to the
Internet, please download the USB Driver.
• Please install USB Driver first before connecting the
Camcorder to your personal computer with the USB
Cable (not supplied) only if you have Windows 98SE
OS.
• If your computer has Windows Me/2000/XP, the
USB Driver is not required to be installed.
1
In order to download and install the USB
Driver, go to
http://www.panasonic.com/consumerdownloads
2
Click [Camcorder] on the screen.
3
Click [USB Driver version 1.00].
4
Decompress the downloaded data.
5
Double click
• The set up program starts running.
6
Click [Restart] if the [InstallShield] dialog
appears.
7
Finish installation by following the
on-screen instructions.
• Click [Next] and proceed with installation.
• After completing the installation, Click [Finish].
8
After the USB Driver is installed, please
restart your computer.
Windows 98SE Users
The following messages may be displayed when
connecting this Camcorder and your personal
computer via USB Cable.
1) The message "MTDV98M3.pdr is not found" is
displayed.
• Enter "C:\Windows\system\IOSUBSYS".
2) The message "MTDV98M3.sys is not found" is
displayed.
• Enter "C:\Windows\SYSTEM32\DRIVERS".
• You may click [Browse] to look for and assign the
path.
icon.
45