manually as otherwise there is a
safety risk.
The changeover between
daytime light and dipped
headlight plus front side lights
can be performed automatically.
When the volume bar is
displayed, the rays of the
light symbol are hidden to save
space.
Settings
Open the
Vehicle
and then select
Day run
Select menu option
lights
Auto.
and set
DRL
On
to
.
The symbol for automatic
daytime light function lights
up on the display.
If the ambient light level drops
below a certain level (e.g. in a
tunnel), the dipped headlight is
automatically switched on. As
soon as an adequate ambient
light level is detected, the day-
time light is switched on again.
When the daytime light is on,
the daytime light symbol shows
on the multifunction display.
Lights
Parking lights
The parking lights come on au-
tomatically when the ignition is
switched on.
The parking lights are a
menu
strain on the battery. Do
.
not leave the ignition switched
on longer than absolutely
necessary.
Headlight low beam
The headlights automatically
come on in their low-beam mode
as soon as you start the engine.
High-beam headlight and
headlight flasher
Press switch 1 toward front to
switch on high beams.
Pull switch 1 rearward to actu-
ate headlight flasher.
The high-beam headlight
can also be switched on
when the engine is not running.
Parking light
Switch on ignition (
4
49
z
37).