Husqvarna HU725AWDEX Product Manual page 18

SERVICE AND ADJUSTMENTS
TO ADJUST HANDLE (See Fig. 22)
The upper handle may be adjusted to three (3) different
height positions.
1. Move operator presence control bar forward to unlock
the handle.
2. Lift handle to desired adjustment position.
OPERATOR PRESENCE
CONTROL BAR
(MOVE FORWARD
TO UNLOCK)
HANDLE
FIG. 22
ENGINE
ENGINE SPEED
Your engine speed has been factory set.
CARBURETOR
Your carburetor is not adjustable.
IMPORTANT: NEVER TAMPER WITH THE ENGINE GOVERNOR,
WHICH IS FACTORY SET FOR PROPER ENGINE SPEED.
OVER SPEED ING THE ENGINE ABOVE THE FACTORY HIGH
SPEED SETTING CAN BE DANGEROUS. IF YOU THINK THE
ENGINE-GOVERNED HIGH SPEED NEEDS ADJUSTING,
CONTACT YOUR NEAREST AUTHORIZED SER VICE CEN TER,
WHICH HAS PROPER EQUIP MENT AND EXPERIENCE TO MAKE
ANY NEC ES SARY ADJUSTMENTS.
18