Power Door Locks; Delayed Locking; Programmable Automatic; Door Locks - GMC 2008 Yukon Denali Owner's Manual

There are several ways to lock and unlock your vehicle.
From the outside, use the Remote Keyless Entry (RKE)
transmitter or the key in the driver's door.
From the inside, use the power door locks or manual
door locks. To lock or unlock the door with the manual
locks, push down or pull up on the manual lock knob.

Power Door Locks

The power door lock switches are located on the
front doors.
K
(Unlock): Press to unlock the doors.
Q
(Lock): Press to lock the doors.

Delayed Locking

When locking the doors with the power lock switch
and a door or the liftgate is open, the doors will lock
five seconds after the last door is closed. You will hear
three chimes to signal that the delayed locking
feature is in use.
Pressing the power lock switch twice or the lock button
on the RKE transmitter twice will override the delayed
locking feature and immediately lock all the doors.
This feature will not operate if the key is in the ignition.
You can program this feature using the Driver
Information Center (DIC). See DELAY DOOR LOCK
under DIC Vehicle Customization (With DIC Buttons) on
page 3-64.

Programmable Automatic

Door Locks

Vehicles with an automatic lock/unlock feature enable
you to program the vehicle's power door locks. You can
program this feature through the Driver Information
Center (DIC). See DIC Vehicle Customization (With DIC
Buttons) on page 3-64 for more information on DIC
programming.
2-11