Removing The Machine From Storage - Toro 22290 Operator's Manual

4. Check the condition of the blade; refer to Inspecting
the Blade (page 19).
5. Service the air cleaner; refer to Servicing the Air
Cleaner (page 17).
6. Tighten all nuts, bolts, and screws.
7. Touch up all rusted or chipped paint surfaces with
paint available from an Authorized Service Dealer.
Removing the Machine from
Storage
1. Check and tighten all fasteners.
2. Remove the spark plug and spin the engine rapidly
using the starter to blow out the excess oil from the
cylinder.
3. Clean the spark plug or replace it if it is cracked,
broken, or if the electrodes are worn.
4. Install the spark plug; refer to Servicing the Spark Plug
(page 18).
5. Perform any needed maintenance procedures; refer to
Maintenance (page 16).
6. Fill the fuel in the fuel tank with fresh gasoline.
7. Check the engine-oil level.
8. Connect the wire to the spark plug.
22