Table of Contents
Advertisement
x Setting up your TV
("Initial Setup")
When you turn on your TV for the first time, the "Initial Setup" menu will appear.
You may change the menu language, preset the TV channels automatically and adjust
the picture position using the buttons on the TV front panel.
Tip
and V/v/B/b buttons on the remote control can also be used for the
• The MENU,
operations below.
1
Press VOLUME +/– to select the desired
menu language, then press TV/VIDEO.
The selected menu language appears.
2
Press VOLUME +/– to select "Yes", then
press TV/VIDEO to preset the channels
automatically or select "No" to skip
automatic channel presetting.
Once you select "Yes", your TV will start
searching for all the available channels.
If the message "No channel found. Please
connect cable/antenna" appears, check your
TV connections, then press TV/VIDEO.
3
Press VOLUME +/– to adjust the bars on
the top and bottom of the menu if they
are slanted, then press TV/VIDEO.
"Picture V-Position" menu appears.
4
If the upper and lower bars are not
equally positioned to the top and
bottom of the screen, press VOLUME +/–
to adjust them, then press TV/VIDEO.
If no adjustment is necessary, then press
TV/VIDEO.
Initial Setup
Language:
English
Move
Select
End
[TV/VIDEO]
[MENU]
Initial Setup
First please connect cable/
antenna
Start Auto Program now?
Yes
No
Move
Select
End
[TV/VIDEO]
[MENU]
Picture Rotation
[ VOL + ]
[ — VOL ]
Move [— VOL +] Select [TV/VIDEO] End [MENU]
Picture V-Position
[ VOL + ]
[ — VOL ]
Move [— VOL +] Select [TV/VIDEO] End [MENU]
continue
Installation
7
Advertisement
Table of Contents
