Kenwood DNX893S Instruction Manual page 69

Bluetooth Control
Step 3: Phonebook transfer
1
Select if you want to transfer your
phonebook data.
This message appears if the device
supports PBAP.
The phonebook data transmission starts.
Some smartphones may request
permission to access the data. The
data transmission will start with your
permission.
When the data transmission and
connection have completed, the Bluetooth
connection icon appears on the screen.
68 68
Connecting the Bluetooth unit
1
Touch [Select Device] in the Bluetooth
SETUP screen.
2
Touch the device name you want to
connect.
Profile select screen appears.
NOTE
• If the icon is lighted, it means that the unit will
use that device.
3
Set each profile as follows.
TEL (HFP) 1, TEL (HFP) 2
The device is connected with the unit as
hands-free phone 1 or 2.