Kenwood DNX893S Instruction Manual page 109

Troubleshooting
Error Message
USB device The connected USB device is rated
over current a current capacity higher than the
status detected. allowable limit.
Navigation The communication error has
Error. Please occurred due to severely cold
turn on power temperature.
again later.
SiriusXM
Problem
Check Tuner A SiriusXM tuner is not connected
to this unit.
Subscription The SiriusXM subscription has been
Updated - Press renewed.
Return To
Continue
SXM Chan The currently selected channel is
Unavailable unavailable.
SXM Ch The currently selected channel is
Unsubscribed not subscribed to.
SXM Check No antenna is connected to the
Antenna SiriusXM tuner.
SXM No Signal No SiriusXM radio signal is received.
Channel The selected channel has been
Locked locked by the parental controls.
Incorrect Pass The selected channel is a mature or
Code entered parental lock channel, and locked by
the parental lock or user lock code.
108 108
Cause
Reason
Solution
Check the USB device. Some trouble may have
occurred to the connected USB device.
Change the source to any source other than
USB. Remove the USB device.
Turn on power again after warming your car
interior.
Solution
Verify that the SiriusXM Connect Vehicle Tuner
cable is securely connected to the radio.
Pressing the Control knob will clear the
message.
—
—
Check that an antenna is connected to the
SiriusXM tuner. Check antenna for damages.
Verify that your vehicle is outdoors with a clear
view of the sky.
Enter the unlock code when you are asked.
Parental Control (P.64).
See
Enter the correct lock code.