Manual Shutter Speed/Iris Adjustment - Panasonic HDC-HS200 Operating Instructions Manual

High definition video camera
Table of Contents

Advertisement

Manual shutter speed/iris adjustment

Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥ Press the MANUAL button. (l 71)
1
Touch [SHTR] or [IRIS].
2
Touch
/
to adjust settings.
1/100
1/100
100
F
WB
SHTR
IRIS
: Shutter speed:
SHTR
1/50 to 1/8000
≥ If [AUTO SLOW SHTR] is set to [ON], the
shutter speed will be set between 1/25 and
1/8000.
≥ The shutter speed closer to 1/8000 is faster.
≥ The shutter speed will be set between 1/2 and
1/2000 in still picture recording mode.
: Iris/Gain value:
IRIS
CLOSE # (F16 to F2.0) # OPEN # (0dB to
18dB)
≥ Value closer to [CLOSE] darken the image.
≥ Value closer to [18dB] brighten the image.
≥ When the iris value is adjusted to brighter than
[OPEN], it changes to the gain value.
≥ Press the MANUAL button again to restore to
the automatic adjustment.
≥ When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
MF
Manual shutter speed adjustment
≥ When the shutter speed is set lower than 1/12
in the still picture recording mode, it is
recommended using a tripod. Also, white
balance cannot be set. The shutter speed will
be set to 1/25 when the power is turned on
again or when the quick start is performed.
≥ If you increase the shutter speed manually, the
noise on the screen may increase.
≥ You may see a band of light around the object
that is shining very bright, or having very high
reflection.
≥ During normal playback, image movement
may not look smooth.
≥ If you record an extremely bright object or
record under indoor lighting, colour and screen
brightness may change or a horizontal line
may appear on the screen. In this case, record
in auto mode or set the shutter speed to 1/100
in areas where the power supply frequency is
50 Hz, or 1/125 in areas of 60 Hz.
Manual iris/gain adjustment
≥ If the gain value is increased, the noise on the
screen increases.
≥ Depending on the zoom magnification, there
are iris values that are not displayed.
73
VQT1Y59

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdc-tm200Hdc-sd200

Table of Contents