Recording Stills - Panasonic DVD Palmcorder VDR-M30PP Instruction Manual

Recording Stills

:
Note
Recording of still images is possible on DVD-RAM disc and
card.
ACCESS/PC
indicator
Power switch
1
Turn the DVD Palmcorder on.
When using DVD-RAM disc:
Set the power switch to " PHOTO".
When using card:
Set the power switch to " PHOTO".
After the ACCESS indicator goes out, perform
the subsequent operation:
Still recording mode
Number of recordable stills
CARD
ACCESS
indicator
REM 9 9 9
8 : 0 0 AM
S E P 3 0 2 0 0 3
(When using DVD-RAM disc)
REM 9 9 9
8 : 0 0 AM
FINE S E P 3 0 2 0 0 3
(When using card)
2
Check the subject on the screen (viewfinder or
LCD).
3
Press the REC button.
The DVD Palmcorder automatically focuses on
the subject at the center of screen (when auto
focus is selected).
The screen will be black, and then the recorded
still will be displayed. When the "." mark
appears, you can proceed with the next
recording; while "DISC ACCESS" or "CARD
ACCESS" is being displayed, you cannot
proceed with the next recording.
4
Set the power switch to "POWER OFF" to turn
the DVD Palmcorder off.
:
Note
•
See "Still recording quality" on page 56 for details of stills
on card.
•
Do not operate the power switch or remove the card while
the ACCESS/PC or CARD ACCESS indicator is lit or
blinking: Doing so may damage the card or the data on
card.
55