Section 3 - Configuration
This page allows you to change some of the advanced network settings of the DHP-1220AV. It is recommended that you only
change these settings if you are familiar with their functions and proper settings, or are instructed to do so.
Enable UPnP:
To use the Universal Plug and Play (UPnP
Enabled. UPnP provides plug and play functionality with
compatible networking equipment, software and peripherals.
WAN Ping:
Checking the box will allow the DHP-1220AV to respond to
pings. Unchecking the box may provide some extra security
from hackers.
WAN Port
You may set the port speed of the Internet/WAN port to 10
Speed:
Mbps, 100 Mbps, 1000 Mbps, or Auto (recommended).
Enable IPv4
Check the box to allow multicast traffic to pass through the
Multicast
router from the Internet (IPv4).
Streams:
Click Save Settings to save the current configuration.
D-Link DHP-1220AV User Manual
Advanced Network
) feature click on
™
26