Insignia NS-LCD32-09 Service Manual page 8

32"LCD TV
Audio
(Options may vary in different
modes.)
Feature
Color–Adjusts the overall color of the picture. (0 ~ 100)
Tint–Increases the color level to add more green to skin tones. Decreases the
color level to add more purple to skin tones. (R50 ~ G50)
Backlight–Adjusts the backlight level (0 ~ 10).
Settings–Restores the video settings to factory default.
Audio Language–Selects an alternate language if the program has more
than one language available. Only available in ATSC TV mode.
Bass–Adjusts the low sounds (bass).
Treble–Adjusts the high sounds (treble).
Balance–Adjusts the right and left speaker volumes.
Digital Audio Output–Selects the audio mode for the digital audio optical
jack.
• RAW: AC-3 in - AC-3 out/PCM in – PCM out.
• PCM: AC-3 in - PCM out/PCM in – PCM out.
TV Speaker–Turns the internal TV speaker On (default) or Off. Does not
affect the digital audio output, the headphone output, and the composite audio
output.
Settings–Restores the audio settings to factory default.
Time Set–Sets the clock. For more information
Sleep Timer–Sets the sleep timer.
Advanced Video Set–
• Noise Reduction–Select from Low, Mid, High, and Off.
• Color Temperature–Select from Normal, Warm, and Cool (default).
• 3D Y/C–Choose from On (default) or Off.
• Dynamic Contrast–Choose from On or Off (default).
• Setting–Restores the settings to factory default.
Password Set–Lets you set the password for parental control options. The
default password is 0000.
Parental Control–Accesses V-chip controls.
Digital Caption–Sets the digital caption type. Choose from Service 1-6, Text
1-4, and CC 1-4.
Closed Caption Options–Customizes closed captions for digital
broadcasting systems. You can adjust Size, Font, Text Color, Text Opacity,
Background Color, Background Opacity, Edge Effect, and Edge Color.
Component Set–Only available in component mode. Lets you set Horizontal
Position (1 ~ 100), Vertical Position (1 ~ 100), and Phase (1 ~ 100). The
Settings option restores the settings to factory default.
VGA Set–Only available in VGA mode. Lets you set Horizontal Position (1 ~
100), Vertical Position (1 ~ 100), Clock (1 ~ 100), and Phase (1 ~ 100). You
can also select Auto Adjust to automatically adjust the settings. The Settings
option restores the settings to factory default.
Input Label–Lets you change the input label.
8
Best Buy NS-LCD32-09