Alesis quadraverb Service Manual page 26

BUFFER OVERFLOW
This message will remain on the display until any button is pressed.
03 - MIDI Dump Request
F0 00 00 0E 02 03 <program#> F7
<program#> = 0..99 selects individual programs
= 100 selects the edit buffer
= > 100 selects all 100 programs
When this message is received, a MIDI data dump will be initiated, and the display will read:
MIDI DATA DUMP
Upon completion of the dump, the display will return to its previously displayed page.
INDIVIDUAL PARAMETER LOCATION FUNCTION AND PAGE VALUES
The following lists give the parameter locations and ranges for each of the effects in each of the configurations.
The parameter associated with a particular function and page may be dependent on both the current
configuration, and the current mode of the effect (e.g., chorus, phase, etc.). In conditions where a page relates
to different parameters depending on the mode of the effect, the parameters are listed in tables under each
mode. All parameters are offset binary values. This means that a signed parameter with a range of -99 to +99
in the display is actually stored as 0 for -99, 99 for 0, and 198 for +99.
REVERB (FUNCTION 1)
CONFIGURATION 0, 5, & 6:
page
0 (type) 0 (PLATE 1)
1 0-3 (INPUT 1)
2 0-1 (INPUT 2)
3 0-198 (IN MIX)
4 1-140 (PREDLY) 1-140 (PREDLY) 1-140 (PREDLY) 1-140 (PREDLY) 1-140 (PREDLY)
5 1-198 (PRE MIX) 1-198 (PRE MIX) 1-198 (PRE MIX) 1-198 (PRE MIX) 1-198 (PRE MIX)
6 0-99 (DECAY)
7 0-8 (DIFFUSION) 0-8 (DIFFUSION) 0-8 (DIFFUSION) 0-8 (DIFFUSION) 0-8 (DIFFUSION)
8 0-8 (DENSITY)
9 0-60 (LOW DEC) 0-60 (LOW DEC) 0-60 (LOW DEC) 0-60 (HIGH DEC) 0-60 (LOW DEC)
Alesis QuadraVerb Service Manual------
MIDI INPUT
IN PROGRESS
1 (ROOM 1) 2 (CHAMBER 1) 3 (HALL 1)
0-3 (INPUT 1) 0-3 (INPUT 1)
0-1 (INPUT 2) 0-1 (INPUT 2)
0-198 (IN MIX) 0-198 (IN MIX)
0-99 (DECAY) 0-99 (DECAY)
0-8 (DENSITY) 0-8 (DENSITY)
4 (REVERSE 1)
0-3 (INPUT 1) 0-3 (INPUT 1)
0-1 (INPUT 2) 0-1 (INPUT 2)
0-198 (IN MIX) 0-198 (IN MIX)
0-99 (DECAY) 0-99 (REV TIME)
0-60 (LOW DEC) 0-8 (DENSITY)
20 08/13/04