Using Sd Memory Cards; Installing And Removing The Sd Memory Card; Formatting Sd Memory Card; Cautions In Using Sd Memory Cards - Panasonic AG-HVX200P Operating Instructions Manual

Using SD memory cards

You can use SD memory cards to save and load
SCENE fi les and USER fi les. (Page 56)
Installing and removing the SD
memory card
Installation
1
Open the cover, and insert the card while
making sure it is oriented in the proper
direction.
Access lamp
L O
C K
2
Close the cover.
Removal
1
Open the cover, and check that the access
lamp is not lit.
2
Press the card further into the unit, grasp
the card, and then remove.
3
Close the cover.

Formatting SD memory card

1
Switch the MEDIA switch to "P2".
2
Set the POWER switch to ON. (Page 20)
3
Press the mode button and set it to MCR
mode (the MCR/VCR lamp lights).
4
Press the MENU button.
32
5
On the menu, select OPERATION, FORMAT
and then SD CARD.
• Select EXIT to cancel the formatting.
6
Select YES on the confi rmation screen.
• The selected SD memory card is formatted.
You can also format from the SD CARD FORMAT
option on the CARD FUNCTIONS screen. (Page
114)

Cautions in using SD memory cards

• SD memory cards used with the AG-HVX200
should conform to SD standards. Be sure to
format cards using the AG-HVX200.
To format SD memory cards using a personal
computer, download the dedicated software from
the support site.
SD memory cards with the following capacity
(8MB - 1GB) can be used for the AG-HVX200:
8 MB 16 MB
128 MB 256 MB
For the latest information not available in the
Operating Instructions, visit the P2 Support Desk
at the following Web sites.
https://eww.pavc.panasonic.co.jp/pro-av/
• SD memory cards must not be used or stored in
an environment where they may be
Exposed to high temperatures/humidities;
Exposed to water droplets; or
Electrically charged.
• Be sure always close the cover when using an
SD memory card.
• You cannot use the SD memory card in the TAPE
mode.
TAPE
32 MB 64 MB
512 MB 1 GB