Table of Contents
Advertisement
TH111C(e).book Page 20 Thursday, August 17, 2006 5:03 PM
Making/Answering Calls
C
Note:
L Use the speakerphone in a quiet
environment.
L While on a call, you can switch from the
base unit to the handset:
– If the handset is off the base unit,
press {C} on the handset, then
press {SP-PHONE} on the base unit.
– If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
Press {^} or {V} while talking.
Making a call using the redial list
The last 10 phone numbers dialed are
stored in the redial list.
1
{REDIAL}
2
Press {^} or {V} to select the desired
number.
L To erase the displayed number, press
{ERASE}.
3
{SP-PHONE}
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
For example, if you need to dial the line
access number "9" when making outside
calls with a PBX:
1
{9} i {PAUSE} i Dial the phone
number.
2
{SP-PHONE}
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses.
20
Answering calls
Using the handset
1
Lift the handset and press {C} or {s}.
L You can also answer the call by
pressing any button except the
joystick or {OFF}. (Any key talk
feature)
2
When you finish talking, press {OFF} or
place the handset on the base unit or
charger.
Auto talk
This feature allows you to answer a call by
simply lifting the handset off the base unit
or charger. You do not need to press {C}.
To activate this feature, see page 42.
Temporary ringer off
While the handset is ringing for an outside
call, you can turn the ringer off temporarily
by pressing {OFF}.
Using the base unit ^
1
{SP-PHONE}
2
Speak into the MIC.
3
When you finish talking, press {SP-
PHONE}.
Y
Advertisement
Table of Contents
