When the VSA system indicator
●
comes on (see page 473).
When you turn the ignition switch
●
to the ON (II) position, the CMBS
indicator should come on for a few
seconds, then go off. If the
indicator comes on at any other
time and a CHECK CMBS
SYSTEM message appears on the
multi-information display, there is
a problem with the CMBS. You
can still drive your vehicle, but
CMBS will not be operating. Have
your vehicle checked by a dealer.
Collision Mitigation Braking System™ (CMBS™)
Limitations
The CMBS may not activate under
some conditions. Here are a few
examples:
The distance between your vehicle
●
and the vehicle ahead of you is too
short.
A vehicle cuts in front of you at a
●
slow speed, or it brakes suddenly.
YOUR VEHICLE
When you accelerate rapidly and
●
approach the vehicle ahead of you
at high speed.
Immediately after you begin
●
driving.
CONTINUED
469