Table of Contents
Advertisement
Multi-Information Display
Memory Position Link
If ''MEMORY POSITION LINK'' is
set to ''ON,'' the driver's seat, the
steering wheel, and outside mirror
positions move to the position stored
in the memory when you open the
driver's door, using the remote
transmitter.
You can choose this customizable
item from ''POSITION SETUP'' by
pressing the INFO ( / ) button
repeatedly.
108
Press the SEL/RESET button to see
the selections.
Select ON or OFF by pressing the
INFO ( / ) button, then enter your
selection by pressing the SEL/
RESET button.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ''SETTING INCOMPLETE''
message appears, go back to
''MEMORY POSITION LINK'' and
repeat the procedure again.
Advertisement
Table of Contents
