Specifications - Yamaha TF-Rack Quick Manual

Hide thumbs Also See for TF-Rack:
Table of Contents

Advertisement

10. Specifications

Sampling Frequency
*1
Internal clock: 48 kHz; Dante clock: 48 kHz, 44.1 kHz (when using NY64-D)
Signal Delays
Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz
Frequency Response
+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT
Total Harmonic
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 Ω, INPUT to OMNI OUT, Input Gain=Min.
Distortion
*2
–128 dBu typ., Equivalent Input Noise, Input Gain=Max.,
Hum & Noise
*3
–85 dBu, Residual output noise, ST master off
110 dB typ., DA Converter,
Dynamic Range
108 dB typ., INPUT to OMNI OUT, Input Gain=Min.
Crosstalk@1 kHz
*4
–100 dB, adjacent INPUT/OMNI OUT channels, Input Gain=Min.
Dimensions (W x H
x D)
480 mm × 132 mm × 409 mm, 9.2 kg (18.9" x 5.2" x 16.1", 20.3lb)
Net Weight
Power Requirements
85 W
(wattage)
Power Requirements
100–240 V 50/60 Hz
(voltage and hertz)
Operating temperature range: 0–40 °C
Temperature Range
Storage temperature range: -20–60 °C
Included Accessories
Quick Guide, power cord, rubber feet, Nuendo Live (DAW software)
*1. Pull-up/down function is not supported.
*2. Total Harmonic Distortion is measured with a –18 dB/octave filter@80 kHz.
*3. Hum & Noise are measured with an A-Weight filter.
*4. Crosstalk is measured with a –30 dB/octave filter@22 kHz.
*
The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file.
http://yamahaproaudio.com
Source code distribution
For three years after the final factory shipment, you may request from Yamaha the source code for any portions of the product which are licensed under the GNU General Public
License/GNU Lesser General Public License/RealNetworks Public Source License by writing to the following address:
10-1 Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, JAPAN
Pro Audio Department, Yamaha Corporation
The source code will be provided at no charge; however, we may require you to reimburse Yamaha for the cost of delivering the source code to you. The source code can be
downloaded by visiting the following URL:
http://www.yamahaproaudio.com/
• Note that we shall bear no responsibility whatsoever for any damage arising from changes (additions/deletions) made to the software for this product by a third party other than
Yamaha (or party authorized by Yamaha).
• Note that re-use of source code released to the public domain by Yamaha is not guaranteed. Yamaha shall not bear any responsibility whatsoever for the source code.
22
TF-RACK Quick Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents