Panasonic AG-DVX100BE Operating Instructions Manual page 46

Using the scene files (continued)
6
The screen below is displayed, so set the file
name of six letters using OPERATION lever.
Set the same as user information (Page 26).
• Characters that can be set
Space A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^_- / .
PUSH MENU TO RETURN
7
After you finish setting the filename, press the
MENU button.
8
Move the OPERATION lever r to select SAVE/
INIT.
CENE F1:-
AMMA
KNEE
MATRIX
SKIN TONE DTL
V DETAIL FREQ
PRO RESSIVE
NAME EDIT
SAVE/INIT
PU H MENU TO RETURN
9
Press the OPERATION lever (h) (or move it
y) then move it r to select YES.
CENE F1:-
AMMA
KNEE
MATRIX
SKIN TONE DTL
V DETAIL FREQ
PRO RESSIVE
NAME EDIT
SAVE/INIT
PU H MENU TO RETURN
E-45
NAME EDIT
SW POSITION F1
+ : PUSH PLAY
- : PUSH STOP
SEL : PUSH FF/REW
NORMAL
AUTO
NORMAL
OFF
OFF
NORMAL
AUTO
NORMAL
OFF
OFF
YE
10
The following screen appears, so press the
OPERATION lever (h).
ILE 1:
SAVE
N T AL
PUSH MENU TO RETURN
11
The following screen appears, so move the
OPERATION lever e to select YES, then press
the OPERATION lever (h).
FILE F1:
FILE F1:
SAVE?
SAVE?
YES
YES
NO
NO
12
Ten beeps sound in succession, the message
below appears, and the changes to the scene
file are complete.
COMPLETED !
13
Press MENU three times to exit the menus.
• The original scene file settings will be restored
when the menu mode is released, the
operation is switched to the VCR mode or
when the power is turned off if SAVE has not
been selected.
• To return the scene file settings to the factory
settings, select INITIAL in step 10, then do
steps 11 to 13.
___
___
PUSH STILL
PUSH STILL
SAVE