The Remote Control; Insert The Battery; Remote Control Setup - Panasonic AG-DVX100BE Operating Instructions Manual

The remote control

Insert the battery

1
Push the catch in the direction shown by arrow
(1) to remove the holder.
2
Insert the battery with the "+" marked side
facing up.
3
Return the holder to its original position.
• When the battery (CR2025) has run out, replace it
with a new one. (The battery lasts about one year,
depending on the frequency of use.)
If the remote control unit fails to work even when it
is operated near the camera-recorder's remote
control sensor, the battery has run out.
• Keep the battery out of the reach of children.
E-19

Remote control setup

When using two camera-recorders simultaneously,
set this camera-recorder and the remote control to
either [VCR1] or [VCR2] so the remote control does
not operate the wrong camera-recorder by mistake.
Setting
• Wireless remote control
Press the STOP (g) and STILL ADV (
at the same time to set the remote control unit for
use with VCR1.
Alternatively, press the STOP (g) and STILL ADV
( ) buttons at the same time to set the remote
control unit for use with VCR2.
When the battery in the remote control unit is
replaced, the remote control unit is set for use
with VCR1.
• Camera
In the setup menus, OTHER FUNCTIONS
screen, REMOTE, set to VCR1 or VCR2.
(Page 76)
If different settings are used for the camera-
recorder and remote control unit, "REMOTE" lights
in red on the viewfinder and LCD monitor.
DATE/
OSD TIME
COUNTER RESET
MULTI/
P-IN-P REC
/REW PLAY
STILL ADV PAUSE STILL ADV
INDEX STOP
VCR2
SELECT
VAR.
SEARCH
STORE
OFF/ON
P.B.DIGITAL
) buttons
START/
PHOTO
STOP
SHOT
TITLE
ZOOM
A.DUB
FF/
INDEX
VCR1
PB.
ZOOM
MENU
SET
ITEM