Panasonic DMP-BDT350 Operating Manual (English, Spanish) Operating Instructions Manual page 39

Recommended audio output setting
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the items.
Press [SETUP] "Audio"
For details of the each item, refer to page 31.
Setup menu
"Dolby D/Dolby
D +/Dolby
TrueHD"
"Digital
Audio "DTS/DTS-HD"
Output"
"BD-Video
Secondary
Audio"
"PCM Down Conversion"
"Downmix"
"High Clarity Sound"
≥ Because underlined items are the factory presets, it is not necessary to change these settings.
If connected to TV via the COAXIAL, OPTICAL or AUDIO OUT terminal, these settings have no effect.
*1
HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
*2
Set "Analog Audio Output" to "7.1ch" or "2ch (Downmix) + 5.1ch". (Press [SETUP]
*3
If the connected equipment that does not support 96 kHz, set to "On".
*4
If the connected equipment that supports the virtual surround function, set to "Surround encoded".
*5
*6 When connected to TV via the HDMI terminal for outputting image, set to "Enable".
Set each item
Receiver with
HD audio
TV via HDMI
*1
decoder via
HDMI
"PCM" "Bitstream"
"PCM" "Bitstream"
"Off" "Off"
No effect No effect
"Stereo" No effect
"Enable" "Disable"
Example of connected equipment
Receiver without
HD audio
*2 *2
decoder via
HDMI
"PCM"
"PCM"
"Off"
No effect
No effect
"Disable"
*6 *6
TV / Device Connection)
Receiver via
Receiver
COAXIAL or
via analog output
OPTICAL
"PCM" No effect
"PCM" No effect
"Off" "Off"
"Off" No effect
*4
"Stereo" No effect
*5
"Disable" "Disable"
*6
VQT2J87 (ENG)
*3
*6
39