Panasonic DMP-BDT350 Operating Manual (English, Spanish) Operating Instructions Manual page 16

Network Easy Setting (Connection Check)
Network Easy Setting (Connection Check)
Complete.
1. LAN cable connection
: Fail
2. IP address setting : Fail
3. Connection to gateway : Fail
LAN cable is not connected.
Please check the connection.
Select "Yes" and press [OK] to check network
connection again. Select "No" and press [OK]
to finish Network Easy Setting.
Yes
OK
Display
1. LAN cable connection or
Connection to access point
2. IP address setting
3. Connection to gateway
1. LAN cable connection or
Connection to access point
2. IP address setting
3. Connection to gateway
[BDT350]
1. LAN cable connection or
Connection to access point
2. IP address setting
3. Connection to gateway
1. LAN cable connection or
Connection to access point
2. IP address setting
3. Connection to gateway
Network Easy Setting (Internet Connection Check)
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet : Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].
OK
Display
≥ "Primary DNS" and "Secondary
Cannot find the server.
(Error code: B019)
≥ The server may be busy or the
Failed to connect to the
server.
(Error code: B020)
≥ Settings of "Proxy Server
16
VQT2J87(ENG)
No
Check the
following
≥ Connection of
: Fail
the LAN
cables (
: Fail
: Fail
≥ Connection
: Pass
and settings
of the hub and
: Fail
router
: Fail
≥ Settings of "IP
Address/DNS
:Pass Settings"
( 33)
:Home
network
available
:Fail
: Pass
: Pass
: Fail
Check the following
DNS" settings of "IP Address/
DNS Settings" ( 33)
service may have been
suspended. Please wait a few
moments, and then try again.
Settings" ( 33) and the router
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting "Network Easy Setting" in
the Setup menu. (
≥ You can redo these settings individually using "Network Settings". (
≥ After performing network settings on this unit, the settings (encryption
level, etc.) of the Wireless router (Access point) might change. When you
have trouble getting online on your PC, perform the network settings on
your PC in accordance with the settings of Wireless router (Access point).
12)
33)
33)