Recommended audio output setting
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of items.
Press [FUNCTION MENU]
"Audio"
Set each item
For details of the each item, refer to page 26.
Setup menu
"Dolby D/Dolby D
+/Dolby TrueHD"
"Digital
Audio
"DTS/DTS-HD"
Output"
"BD-Video
Secondary Audio"
"PCM Down Conversion"
"Downmix"
≥ Because underlined items are the factory presets, it is not necessary to change these settings.
If connected to TV via except HDMI, these settings have no effect.
*1
HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
*2
*3
If the connected equipment that does not support 96 kHz, set to "On".
If the connected equipment that supports the virtual surround function, set to "Surround encoded".
*4
select "Other Functions"
Example of connected equipment
Receiver with
TV via HDMI
HD audio
*1
"PCM"
"PCM"
"Off"
No effect
"Stereo"
"[OK]" select "Setup"
Receiver without
decoder
HD audio
*2
via HDMI
via HDMI
"Bitstream"
"PCM"
"Bitstream"
"PCM"
"Off"
"Off"
No effect
No effect
No effect
No effect
"[OK]"
Receiver via OPTICAL
decoder
*2
"PCM"
"PCM"
"Off"
"Off"
*3
"Stereo"
*4
33
VQT2H86