Citizen CMP-40 SERIES User Manual page 48

Sub Menu Menu items
Bluetooth Security
Interface
Change PIN code 0000* to 9999
Printer Name
Address
Print Settings
Wireless LAN Configure
Interface
Options
Enabled
Disabled*
The maximum length
is 20 characters
("Mobile Printer" is
default.)
—
—
IP Address
000.000.000.000* to
255.255.255.255
SubnetMask
000.000.000.000* to
255.255.255.255
Gateway
000.000.000.000* to
255.255.255.255
DNS
000.000.000.000* to
255.255.255.255
SSID
Mode
Infrastructure/
Ad-Hoc/
SoftAP*
WPA Type
NONE*/
WPA-PSK/
WPA2-PSK
WPA Key
At least 8 characters
in length, with a max
length of 12 characters
can be set.
48
Description
If "Enabled" is selected, printer name
becomes visible from other Bluetooth
devices.
If "Disabled" is selected, printer
name becomes invisible from other
Bluetooth devices.
The PIN code can be changed.
You can change the printer name
which is used for the Bluetooth
connection.
You can check the Bluetooth address
of this printer.
Current Bluetooth settings can be
printed by pressing the Enter ( )
button.
The printer's IP address can be set.
Note: If you set the DHCP setting to
"Enabled" , this menu cannot be used.
The printer's subnet mask can be set.
Note: If you set the DHCP setting to
"Enabled" , this menu cannot be used.
The printer's router (gateway) address
can be set.
Note: If you set the DHCP setting to
"Enabled" , this menu cannot be used.
The DNS server address (if necessary)
can be set.
Note: If you set the DHCP setting to
"Enabled" , this menu cannot be used.
The SSID for an access point can be
set.
If you want to connect this printer
to the network via an access point,
select "Infrastructure" . If you want
to connect this printer directly to
another device, not via access point,
select "Ad-Hoc" .
If you want to use this printer as an
access point, select "SoftAP" .
You can select a WPA type from
"NONE" , "WPA-PSK" and "WPA2-PSK" .
You can set the encrypted key which
is used for protocol for the WPA
encrypted protocol.