Table of Contents
Advertisement
To reveal the screw heads beneath the keyboard frame, use the flat end of the multi-tool to slide the
keyboard forward by 2.5 mm (0.1 inch).
Note: Do not press or hold the keys while sliding the keyboard frame, otherwise the keyboard frame cannot
be moved.
Use the cross end of the multi-tool to loosen the screws.
Pivot the keyboard slightly upward as shown by the arrow
4
until you can see the connectors on the bottom
side of the keyboard. Then turn over the keyboard as shown by the arrow
5
.
63
.
Chapter 9
Removing or replacing a FRU
Hide quick links:
Advertisement
Table of Contents
