Panasonic KX-TG8231 Operating Instructions Manual page 45

Problem
I cannot page the handset.
Caller ID
Problem
The handset does not
display the caller's name
and/or phone number.
The caller list/incoming
phone numbers are not
edited automatically.
I cannot dial the phone
number edited in the caller
list.
Time on the unit is shifted.
For assistance, please visit http://www.panasonic.com/help
Cause/solution
L The called handset is too far from the base unit.
L The called handset is in use. Try again later.
Cause/solution
L You have not subscribed to Caller ID service.
Contact your service provider/telephone
company to subscribe.
L If your unit is connected to any additional
telephone equipment such as a Caller ID box or
cordless telephone line jack, disconnect the unit
from the equipment and plug the unit directly
into the wall jack.
L If your unit is connected to a telephone line with
DSL service, we recommend connecting a noise
filter between the base unit and the telephone
line jack. Contact your DSL provider for details.
L The name display service may not be available
in some areas. Contact your service provider/
telephone company for details.
L Other telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
L The caller requested not to send caller
information (page 23).
L If a call is being transferred to you, the caller
information is not displayed.
L Generally, caller information is displayed from
the 2nd ring.
L The Caller ID number auto edit feature is turned
off. Turn it on and try again (page 28).
L You need to call back the edited number to
activate Caller ID number auto edit.
L The phone number you dialed might have been
edited incorrectly (for example, the long
distance "1" or the area code is missing). Edit
the phone number with another pattern (page
24).
L Incorrect time information from incoming Caller
ID changes the time. Set "Time adjustment"
off.
Useful Information
45