One-Touch Dialer; Storing A Phone Number In The Direct Button - Panasonic KX-TG2670N Operating Instructions Manual

One-Touch Dialer

You can store a phone number in the
stored number is dialed with a one-touch operation.

Storing a Phone Number in the DIRECT Button

Make sure the unit is in the standby mode initially.
Press
1
(FUNCTION/CH)
2 Press
Ö
points to "Program".
Press
3
á
While the arrow points to "Save
4
DIRECT#", press
Enter a phone number, up to 22 digits.
5
•Each time you press (CLEAR) the digit to the
left of the cursor is erased. To erase all digits,
press and hold (CLEAR).
•The last 32 digits number you entered will be
displayed. To confirm the remaining number, press
Ü or á.
6 Press
Ö
•If you want to edit the entered number, press
Ñ (Edit key) and return to step 5.
7 Press
á
•A beep sounds.
•To return to the standby mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
•If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number in step 5. This counts as one digit (p. 52).
To erase the stored number:
Press and hold
40
.
or repeatedly until the arrow
Ñ
(Yes key).
(Yes key).
á
(Next key).
(Save key).
in step 5.
(CLEAR)
button of the handset. The
(DIRECT)
Ringer volume
H
Program
GF
H
Save DIRECT#
Set flash time
GF
IH
1234567890123456
789012
IH
1234567890123456
789012
F
=Edit
1234567890123456
789012
Save DIRECT#
H
=Yes
H
=Yes
G
=Next
G
=Next
H
=Save