Touch Flex Shielding - Sony XPERIA P LT22i Working Instructions

Replacement

4.39 Touch Flex Shielding

Note! Only apply for revision 3 of PBA!
Follow the 3.1 – 3.3 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Touch Flex Shielding.
Carry out the Installation as described below.
Follow the 5.5 – 5.7 Reassembly instructions!
REMOVAL
Disconnect the BtB connector by using a Front Opening
Tool.
Carefully peel off the Touch Flex Shielding with fingers.
Do not damage the touch panel FPC!
Scrap! Not to be reused!
INSTALLATION
Attach a new Touch Flex Shielding on the touch panel FPC
as indicated by the blue lines.
1262-6302 Rev 3

Sony Mobile Communications AB – Company Internal
Working Instruction (mech)
73(89)