Replacement
4.26 Foil Adhesive Double Side LCD Flex
Follow the 3.1 – 3.7 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Foil Adhesive Double Side LCD Flex.
Carry out the Installation as described below.
Follow the 5.1 – 5.7 Reassembly instructions!
REMOVAL
Detach the FPC from the front unit as shown.
Peel off the Foil Adhesive Double Side LCD Flex by using a
Flex Film Assembly Tool.
Scrap! Not to be reused!
INSTALLATION
Place a new Foil Adhesive Double Side LCD Flex on the
correct position.
1262-6302 Rev 3
Sony Mobile Communications AB – Company Internal
Working Instruction (mech)
52(89)