Panasonic KX-TG2631AL Operating Instructions Manual page 47

TG2631AL_2632AL.book Page 47 Monday, February 20, 2006 2:54 PM
Making/answering calls, intercom
Problem
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
The handset does not
ring.
I cannot make a call.
I cannot redial by
pressing {REDIAL}.
I cannot have a
conversation using the
headset.
I cannot page the
handset.
I cannot page the base
unit.
*1 KX-TG2632
Cause/solution
L Move the handset and the base unit away from other
electrical appliances.
L Move closer to the base unit.
L Raise the base unit antenna.
L Turn on the clarity booster feature (page 20).
L If your unit is connected to a telephone line with ADSL
service, we recommend connecting a noise filter
between the base unit and the telephone line socket.
Contact your ADSL provider for details.
L The ringer volume is turned off. Adjust it (page 31).
L The base unit or another handset is in use. Try again
*1
later.
L Dial lock is turned on. To turn it off, see page 20.
L If the above remedies do not solve the problem, set the
dialling mode. Press {MENU} {0} {5} {1} {Save}
{OFF}.
L The unit is not designed to be used with rotary (pulse
dialling) services.
L If the last number dialled was more than 48 digits long,
the number will not be redialled correctly. Dial the
number manually.
L Dial lock is turned on. To turn it off, see page 20.
L Make sure that an optional headset is connected
properly (page 43).
L If "SP-phone" is displayed on the handset, press {C}
to switch to the headset.
L We recommend using the Panasonic headset noted on
page 5.
L The called handset is too far from the base unit.
L The called handset is in use. Try again later.
L The base unit is in use. Try again later.
Useful Information
47